Shop Logo

Rory's R/C Hobby House

Shop located at

44 Main Street
Park Avenue
North Rockhampton
Queensland 4701

Monday to Friday, 11am till 7pm
Saturday, 11am till 4pm.

ABN 16 942 302 441

Please note: We are now able to accept Visa, Mastercard & Eftpos

Cred C

Supplier of Radio Control Aircraft, Helicopters,

Cars and Rock Crawlers


Go To Online Shop
Information Lists
Pylon Bits
Suppliers & Forums
Customers Models
Local Comp Pictures
Time

Modelling products for Modelers from a Modeler.

Phone    (07) 4923 7933
Fax        (07) 4923 7944

Supplying radio control gear for helicopters, airplanes, aircraft, fuel, accessories, kits, ARF's or any other modelling needs.

 

Visit the shop on Main Street North Rockhampton for the latest in store Weekly SPECIALS

 

Now In Stock, check out the new Sanwa range of 2.4G Air & Car Radios

The SD-10G is an all-out, high performance radio designed to give every modeler, sport or competition pilot, a radio that is easy to use, powerful, flexible for any application, and yet very affordable. Sanwa has found great success with this amazing radio.


10-Channel Computer Radio With Advanced Programming for Competition
Helicopters, Sailplanes, And Powered Aircraft.
• Compatible With All Airtronics 2.4GHz FHSS Aircraft Receivers
• Transmitter Is Compatible With 2-Cell Lithium Batteries
• Full-Range 92104 10-Ch 2.4GHz Receiver Included
• Ball Race Supported Gimbals With Adjustable Springs And Adjustable
Throttle Ratchet
• Unique "Direct Model Select" Allows Selection of 3 Favorite Models Without
Entering the Computer
• Stick Mode 1, 2, 3, and 4 Are Available And Easily Selected By User
• 5 Complete Flight Modes (Helicopter, Sailplane, and Aircraft)
• Flight Modes Can Be Named
• 3-axis Triple Rates And Triple Expo With Unique Adjustment in Each Direction of Travel
• All Switches Are 3-Position Switches
• Proportional Side Sliders With Center Detent
• 100% Completely Assignable Switches
• 20-Model Memory,
• 5 P-Mixes with 9-Point Curves and Graphs
• Customizable Menu
• Simple Wing, Swash, And Model Templates For Easy Model Setup
• Easy Navigation, Spreadsheet-Like Menu For Control Surface/Swash
Adjustments
• Complete Trim Authority And Sensitivity Adjustments and Cross-Trims
• Easily Activated and Inhibited Inc/Dec Switch Allows The Pilot to Adjust Mixing Ratios In-Flight
• Failsafe Programming Available On All Channels
• Multi-Function Timer Advanced Trainer Functions (Trainer Only Available on SD-10G to SD-10G)
• Includes T/x, R/x and T/x Battery.

$419.00

san10

Fly the SD-6G and you'll have a radio ready for just about every 6-channel aircraft and helicopter available today. From micro electric to scale aerobatic aircraft, from mini fixed pitched heli's to advanced CCPM 3D electric helicopters, the SD-6G can handle it.

• 10-Model Memory
• Advanced Airplane and Heli Software
• 3 Flight Modes (Heli and Air)
• P-Mixes
• 3-Axis Dual Rate and Expo
• 5-Point Throttle Curve (Heli and Air)
• Gyro Switch (Heli)
• Advanced Swashplate CCPM Mix (2 and 3 sx)
• Advanced Swashplate Leveling (Heli)
• Servo Monitor
• Throttle/Engine Cut Switch
• Trainer Compatible with SD-5G and SD-10G
• Adjustable Gimbal Spring Tension
• Advanced Aircraft Mixes
• Direct Select – Model Select Buttons
• Program Features (Common for Both Heli and Air):
• Model Naming
• Model Select
• Model "Direct Select"
• Data Reset
• Data Copy
• Trainer System (Compatible with SD-5G/10G)
• Throttle Cut
• Wing/Swash Type
• Dual Rates (3 axis) (Common or Individual for Flight Modes)
• Exponential (3 axis) (Common or Individual for Flight Modes)
• 3 Flight Modes
• Individual or Common Trims
• Program Mixes (2)
• Servo Reverse
• Sub Trim
• EPA
• Servo Monitor
• Stop Watch

$219.00

san6

The SD-5G 2.4GHz is a full-range FHSS-1 radio that includes the Sanwa RX600 receiver.
The SD-5G is compatible with all Sanwa FHSS1 receivers including the RX60, RX500, RX600, RX700, and RX800.
Check out these features:

• 3 Model "Direct-Select" model select buttons
• 3 Model Memory
• Digital Trims With Audible Sound for Neutral Setting
• 2.4GHz Sanwa FHSS-1 Proven Technology
• Compatible with ALL Sanwa FHSS-1 Receivers
• Servo Reversing
• Delta/Elevon Mixing
• V-Tail Mixing
• Master Dual Rate Switch
• Throttle Cut
• Trainer Compatible with other SD-5G AND SD-10G radios
• ATV (Adjustable Throw Volume) for flight control channels
• EPA (End Point Adjustment) for throttle
• Light-Weight, Well Balanced
• High Quality And Feel Gimbals
• Full Range Radio 2.4GHz system
• Includes RX600 2.4GHz FHSS-1 Full Range Receiver

$145.00

san5

Since the beginning, the MX series has lead the way with a feature-packed radio at an affordable price.
Today's MX-3X is the pinnacle of this development. This is a 3-channel radio with advanced programming that some radio manufacturers do not offer at any price!

• 3-channel use
• 18-model memory
• Full range 2.4GHz FHSS-3 spread spectrum technology
• Extremely fast latency transmission
• Adjustable power supply (4-cell alkaline, 6-cell NiMh, or 2-cell LiPo)
• Light weight to prevent fatigue during extended driving situations
• Multiple failsafe settings for gas or nitro-powered vehicles
• Variable 3rd channel multi-function mode switch
• Adjustable incremental steps for 3rd channel servo to have multiple positions
• Allows 4-wheel steering, crab, and steering lock for crawlers
• Allows dig, burn, and free adjustments for crawlers
• Allows dual speed controls to be mixed together and independently
• Allows a variety of mixing of the 3 channels
• Adjustable servo speed settings
• Exponential, dual rate, and end-point adjustment settings
• Backward-compatible with FHSS-2 receivers
• Adjustable trim steps for customized preference
• 'Beep' can be muted for quiet operation
• Model naming
• Battery alarm
• Ergonomic design with adjustable trigger for various sized hands

$219.00

san3

An all new look, The MT-4 2.4Ghz radio sports a large full dot LCD display and all the usual features you would expect from a radio of this level.
What's interesting is the inclusion of a telemetry system that can read receiver voltage, RPM and 2 different temperatures and feed it back to the screen on the transmitter.


• 4 channel control (built-in antenna)
• Large LCD screen (128x64 dot)
• New receiver (RX-461)
• Built-in telemetry function (receiver voltage, speed, temperature)
• Dual D/R ratio adjustment
• SUB TRIM
• TIMER (Lap / INT / Down type)
• ABS
• The volume adjustment (steering, throttle adjust volume)
• AUX1, AUX2 mixed control
• CH SET 1-4 ch all settings (D/R, EPA, SPEED, EXP...etc.)
• Fail Safe funtion
• 8 digit username and model name input
• 20 group model memory
• Modulation (DS2, FH3, FH, 3F, FH4T)
• Throttle mode (5:5 , 3: 7)
• TX Power source (4 x AA batteries)
• Compatible receivers (RX-371, RX-442DS, RX-451, RX-451R)
• Trigger position adjustable (front/rear slide 5mm , left/right 3° )

$289.00

san4

 

Have a look at some of the latest gear for the 1/10 RC Crawlers and accessories
r1

g1s

$259 New Price

gmt

Rock Crawler Wheels

Main Features:

True beadlock wheels - No gluing
Dual side beadlock system
Black surface
Great for Rock crawling
Fits 12mm hex hubs and 2.2 inch size tires
Sold in pairs

What's included:

Gmade GT 2.2" beadlock wheels x 2
Nylon beadlock rings x 4
Stainless steel silver round head bolts x 32
Stainless steel silver cap head bolts x 12

Specs:

Width: 34mm
Diameter: 55.5mm (2.2inch)
Offset: +6.5mm
12mm hex mount

$16

gmw

Rock Crawler Tyres

Main Features:

Gmade Bighorn tires are high grip tires esigned for various rock crawlers & trucks.
These tires are made of super soft compounds for good grip over all kind of terrain.
Large, deep lugs provide exceptional traction in rock, mud, and dirt.
Gmade Bighorn tires are arguably the best rock-crawling tires available.
Fits Gmade GT 2.2" beadlock wheels series and 2.2 inch size wheels.
Sold in pairs. Inner foams are included.

What's included:

Gmade Bighorn Rock Crawling Tires x 2
Inner foams x 2

Specs:

Tire Height: 136mm(5.3")
Tire Width: 59mm(2.3")
Inner Diameter: 56mm(2.2")

$16.50

lb2

Scale Lighting

Main Features:

CNC Machined from solid billet aircraft aluminum
Silver anodized Lights and Black anodized Lightbar
Clear LED Lights
Can be installed on Gmade R1 for off-road style
Direct fit on Gmade R1 Chassis

What's included:

Aluminum Light x 2
Aluminum Lightbar x 1
LED Light x 2
2-pin Connector x 1
Installation Screws

$19

lb3

Scale Lighting

Main Features:

CNC Machined from solid billet aircraft aluminum
Silver anodized Lights and Black anodized Lightbar
Clear LED Lights
Can be installed on Gmade R1 for off-road style
Direct fit on Gmade R1 Chassis

What's included:

Aluminum Light x 3
Aluminum Lightbar x 1
LED Light x 3
2-pin Connector x 1
Installation Screws

$23

 

 

More gear for the 1/10 RC Crawlers

1/10 Bulldog 9300XT Scale Brushed Wireless Winch (Black Edition) Industry first full metal winch with wireless remote! Each bulldog is uniquely programmed to each receiver, so you can operate mutiple winch in one area. Brushed Motor and ESC Steel King Kong hook Steel cable with Teflon coating Steel alloy housing Works with Lipo 2s and 7 cells NiMh batteries.

Brushed Motor and ESC
Steel King Kong hook
Steel cable with Teflon coating
Steel alloy housing
Works with Lipo 2s and 7 cells NiMh batteries.
Suggested pull rate: 1.5KG (3.3lbs)
Max pull rate: 2KG (4.4lbs)
Powder coated black color
50 feet range wireless remote

$75

rcwb

1/10 Bulldog 9300XT Scale Brushed Wireless Winch (Gun Metal Gray Edition) Industry first full metal winch with wireless remote! Each bulldog is uniquely programmed to each receiver, so you can operate mutiple winch in one area. Brushed Motor and ESC Steel King Kong hook Steel cable with Teflon coating Steel alloy housing Works with Lipo 2s and 7 cells NiMh batteries.

Brushed Motor and ESC
Steel King Kong hook
Steel cable with Teflon coating
Steel alloy housing
Works with Lipo 2s and 7 cells NiMh batteries.
Suggested pull rate: 1.5KG (3.3lbs)
Max pull rate: 2KG (4.4lbs)
Powder coated black color
50 feet range wireless remote

$75

rcwg

1/10 Bulldog 9300XT Scale Brushed Wireless Winch (Red Edition) Industry first full metal winch with wireless remote! Each bulldog is uniquely programmed to each receiver, so you can operate mutiple winch in one area. Brushed Motor and ESC Steel King Kong hook Steel cable with Teflon coating Steel alloy housing Works with Lipo 2s and 7 cells NiMh batteries.

Brushed Motor and ESC
Steel King Kong hook
Steel cable with Teflon coating
Steel alloy housing
Works with Lipo 2s and 7 cells NiMh batteries.
Suggested pull rate: 1.5KG (3.3lbs)
Max pull rate: 2KG (4.4lbs)
Powder coated black color
50 feet range wireless remote

$75

rcwr

King Kong Small Hook (Black Chrome) King Kong hook is the most scale miniture hook on the market and its also the strongest! Can also be used as souvenir key chain! Industrial grade heavy duty alloy Pull rate of 50kg (110lbs) Powder coated

$20

rchb

King Kong Tow Shackle with Mounting Bracket Heavy duty and extremly scale tow shackle! Specification: Heavy duty steel Fit RC4WD hook 1/10 scale Base heigh: 16mm/.59inch Base width: 15mm/.62inch Installed on our winch: What's included: 1x KK Tow Shackle with Mounting Bracket Note: For complete truck, you will need two of this product.

$19

rcsm

King Kong Tow Shackle Heavy duty and extremly scale tow shackle! Specification: Heavy duty steel Fit RC4WD hook 1/10 scale. Installed on our winch: What's included: 1x KK Tow Shackle.

$10

rcs

Aluminum Scale Winch Fairlead Designed for a precision guide for your winchline. CNC machined aluminum All specs are in mm (metric): What's included: 1x 1/10 Scale Fairlead 2x m2 screw.

$9

rcf

 

Blade 120 SR Heli Just released and now available.

120 SR BNF Electric Micro Heli

 

brtf

$219.00

Features

Sub-Micro Size
100% factory-assembled, test-flown and ready-to-fly right from the box
Unique rotor head designed specifically to provide stability of a co-axial helicopter and agile control of a single rotor helicopter
Factory installed 5-in-1 control unit with Spektrum 2.4GHz DSM2 compatible receiver, main motor ESCs, mixer , gyro and fully-proportional servos.


Overview

The Blade 120 SR is a fixed-pitch heli that will give you the confidence to master the basics of single-rotor flight. Its unique rotor head was specifically designed to provide the inherent stability of a co-axial helicopter, but provide the agile control of a single rotor helicopter. Modeled after the popular ultra micro-sized Blade mSR, the sub micro-sized 120 SR is larger, faster, and more powerful -- which makes outdoor flight a reality.

It comes out of the box 100% factory built and equipped with a factory-installed 5-in-1 control unit with Spektrum 2.4GHz DSM2 compatible receiver, main motor ESCs, mixer, gyro, and fully proportional servos. A ready-to-fly version with 2.4GHz DSM2 transmitter and a Bind-N-Fly version without transmitter, for those who already own a DSM2 aircraft transmitter, are available. Both include a 1S 500mAh Li-Po battery and a single-cell, Variable Rate Li-Po charger as well as an AC power supply.


Specs
Type Sub-Micro Fixed-Pitch Single-Rotor Helicopter
Main Rotor Diameter 12.5 in (318mm)
Gross Weight 3.75 oz (106g)
Length 12.5 in (318mm)
BNF

120 SR RTF Electric Micro Heli, Mode 1

bbnf

$259.00

Features

Sub-Micro Size
100% factory-assembled, test-flown and ready-to-fly right from the box
Unique rotor head designed specifically to provide inherent stability of a co-axial helicopter, but provide the agile control of a single rotor helicopter
Factory installed 5-in-1 control unit with Spektrum 2.4GHz DSM2 compatible receiver, main motor ESCs, mixer, gyro and fully-proportional servos.


Overview

The Blade 120 SR is a fixed-pitch heli that will give you the confidence to master the basics of single-rotor flight. Its unique rotor head was specifically designed to provide the inherent stability of a co-axial helicopter, but provide the agile control of a single rotor helicopter. Modeled after the popular ultra micro-sized Blade mSR, the sub micro-sized 120 SR is larger, faster, and more powerful -- which makes outdoor flight a reality.

It comes out of the box 100% factory built and equipped with a factory-installed 5-in-1 control unit with Spektrum 2.4GHz DSM2 compatible receiver, main motor ESCs, mixer, gyro, and fully proportional servos. A ready-to-fly version with 2.4GHz DSM2 transmitter and a Bind-N-Fly version without transmitter, for those who already own a DSM2 aircraft transmitter, are available. Both include a 1S 500mAh Li-Po battery and a single-cell, Variable Rate Li-Po charger as well as an AC power supply.

Specs
Type Sub-Micro Fixed-Pitch Single-Rotor Helicopter
Main Rotor Diameter 12.5 in (318mm)
Gross Weight 3.75 oz (106g)
Length 12.5 in (318mm)
RTF

 

Check the Black Hawk Models American Classic Series NEW to RAMS

bhml
The American Classic Series of kits by Black Hawk Models present famous designs of the past in modern kit form.   Some of the models in this line were designed by famous designers and many have won trophies in National competition.   American Classic models are more advanced than the standard Black Hawk Models kits.   They require more building skills, including the use of covering materials in many cases.  These planes require larger engines and generally provide better, more stable flight characteristics.  While Junior Ace and Black Hawk Models FS series models are good starting points, the American Classic models are the goal that modelers strive to achieve.

chal

Challenger $89.00

  • WING SPAN: 32"
  • ENGINE: .19 TO .29
  • SKILL LEVEL: Medium
  • Kit includes:
    • Laser cut parts
    • Built-up wing and fuselage
    • Plastic wheel pants and engine cowl
    • Plastic canopy
    • Leading edge shaping tool

gkp

Giant King Pin $78.00

  • WING SPAN: 44"
  • WING AREA: 451"
  • ENGINE: .19 TO .40
  • SKILL LEVEL: Medium
  • Kit includes:
    • Laser cut and shaped parts
    • TIG wing
    • Full size plans
    • Complete hardware package

bhmsm

Giant Stunt Master $84.00

  • WING SPAN: 40"
  • WING AREA: 450 Square Inches
  • ENGINE: .29 to .40
  • Kit includes:
    • Built-up wing
    • Optional landing gear
    • All modern hardware included
perk

Perky $58.00

  • WING SPAN: 18"
  • ENGINE: 'A' size .19 to .30 Ignition engine or .09 to .15 Glo engine
  • Kit includes:
    • Laser cut parts and blocks to carve
    • Vintage hardware and wheels
    • Two full size plans
Race against the Phantom!

phan

Phantom MK XV $58 .00

  • WING SPAN: 21"
  • ENGINE: .15 to.19
  • Kit includes:
    • Laser Cut Parts
    • Shaped PAarts
    • Full Size Plans
    • Complete Hardware
    • Racing Wheels
    • Clear Canopy
Race against the Perky

stntr

Giant Stunt Master $106.00

  • WING SPAN: 54"
  • ENGINE: .35 TO .60 (Modern .40 recommended)
  • SKILL LEVEL: Medium
  • Kit includes:
    • Laser cut parts
    • Built-up wing and fuselage
    • Full size plans
    • Complete hardware package

 

Futaba 8-Channel 2048 2.4GHz Computer System

Now in stock

More radio for the money!
Priced $100s less than comparable systems, but loaded with features! Many of the 8FG's features have never been available before at this price – if at all.

That makes it the perfect system for upper-level sport fliers as well as entry- to mid-level competition pilots. Plus, Futaba's celebrated FASST technology is integrated into the radio, so you enjoy all of the advantages of 2.4GHz!

Six proportional channels and two switched channels "Real-time" response with 2048 resolution and extremely low latency.

Perfectly balanced right out of the box for neckstrap users

Accepts a 32MB to 2GB SD memory card* for software updates and almost unlimited aircraft memories.
(*SD memory card not included)

You'll program like a pro with the 8FG's SensorTouch™ pad! Similar to the "click wheel" interface of an iPod® mobile digital device, the 8FG's SensorTouch™ pad lets pilots navigate through menus with unprecedented speed and ease, using only a light touch.

The 128 x 64 backlit LCD screen offers adjustable contrast for clear viewing in any light conditions.

fut8c

$499.00.

hylo Hyperion EMETER II and RDU hylo

Emeter II now in stock (4/2/2009)
Note that the wide range of functions performed by Emeter and RDU today may be impressive, but it will only get wider... With the ability to parallel future devices to the RDU AUX port, we're planning additions such as Airspeed and Load in 2009 and perhaps even GPS logging. And with steady firmware updates, we'll be able to incorporate your suggestions to suit your needs now and in the future...


The Emeter II and RDU are natural companions, and together have an astonishing array of capabilities. As such, we recommend #HP-EM2-SET with Emeter and RDU at $32.00 savings to you. But they are each quite powerful even separately, so we do offer various configurations to suit all users.

EMETER II SET with RDU (#HP-EM2-SET)
Includes the items pictured:
* Emeter II
* RDU (remote data unit)
* Emeter II<>RDU Data Cable
* Emeter II Power Input Plug
The Emeter II supports the RDU by downloading log
files to Emeter, Display of log files, Calculation of
Thrust-Efficiency (if prop selected), Calculation of
internal resistances... and much more. In addition, it
can program Hyperion TITAN ESC, ATLAS Digital
Servos, upcoming ATLAS ESC. It can drive servos or
ESC via the dial on the face, or create automated test
routines. We could go on... but just have a look .....


(note: HP-EM2-SET saves $32.00 over purchase of separate Emeter & RDU)

$359.00

 

hy em

EMETER II & CABLES (#HP-EM2)
Includes the items pictured:
* Emeter II
* Emeter II<>RDU Data Cable
* Emeter II Power Input Plug

$178.00

 

hyem2

RDU UNIT (#HP-EM2-RDU, see also #HP-TI-PRGUSB below)
Dimensions: 36 x 29 x 13.5mm
Weight: 26~28g according to wire length
- Logs remotely, or at bench while connected to Emeter
- Records internally: Ambient Temp, Height, Throttle, Current, Voltage, Watts
- Option External Sensors: Temp1, 2, and 3. Reliable Phase Tachometer for Brushless Motors.
- Can be connected to Emeter Suite Software for DL to display of Data on PC, or Configuration
- Sample rates from 4 samples per second to 8 seconds per sample
- Firmware upgradable by Emeter with SD card installed, or by PC application
(pc app Feb 15 09)

$213.00

hy em3

Now in stock Perry Pumps and Valves

The VP-30 regulating pump is capable of performing like no other fuel delivery system. It delivers an ideal .25 PSI to any model carburetor from a .15 to a 3.0 cu.in. engine. The pressure remains constant throughout the entire speed range, making the carburetor adjustment easy and simple. Once the needle valve is adjusted, the mixture will not vary regardless of how low the fuel or the attitude of the airplane, thus eliminating rich/lean runs altogether. Requires the crankcase tapped pressure nipple .

$75

pbp

The VP-20 pump for your 4-cycle engine is used by thousands of modelers throughout the world because it is trouble free and provides the most reliable fuel delivery to your 4-cycle engine.

This pump mounts to the front or back of the crankcase, on a mounting plate supplied with the VP-20 and 22SG pumps.

The pumps are actuated by engine vibration. May also be used for 2-cycle engines. Not recommended for opposed multi-cylinder engines.

$70

pbp2

Adjust your fuel mixture setting while in flight with the VP-IMC-05. Mounts conveniently in the engine compartment, on the firewall, etc.

Mounting hardware supplied.
Requires servo for operation.

$40

pfm

The Conley Precision Products VP-RNV-01 with it's "O" ring sealed needle for airtight fuel draw is the absolute final touch for your model. It's the answer for the cowled engine and the ultimate in safety. Accessibly mounted to the fire wall, motor mount, or engine cowl, you can now adjust your fuel mixture from a safe distance away from your spinning prop. Can be used with engines from .25 to 1.20.

Mounting hardware supplied.
Ground adjustable only.

$35

prn
     

 

Hyperion EOS 0606i 6S 6A max CHARGER , with Integrated LBA balancer. LiPoly(3.7v), LiFePO4/A123(3.3v), Nicd, NiMH, and Lead-Acid charge modes. Dataport for PC software. 11v~15VDC Inputs - Hyperion Balance Multi-Adapter included for 2S to 6S packs!

$125.00

hp6i

Hyperion EOS 0606i

6S 6A max CHARGER AC/DC, with Integrated LBA balancer. LiPoly(3.7v), LiFePO4/A123(3.3v), Nicd, NiMH, and Lead-Acid charge modes. Dataport for PC software. 11v~15VDC and 100v~240V AC Inputs - Hyperion Balance Multi-Adapter included for 2S to 6S packs

This is the best value for money you have ever seen

$153.00

hp6iac

 

Count Up / Count Down Talking Timer With Clock

This up/down counter is ideal for cooking, exercising, sports, and keeping a check on the parking meter as it automatically announces the time under or over the countdown to zero. Also featuring a clock, 6 selectable alarms and auto-repeat function. Counts up or down for a maximum 24 hours.

Very popular amoungst the Glider and 7 Cell flyers

- Uses 2 x SG13 batteries, included
- Size: 83(H) x 65(W) x 27(D) mm.

$25

T Time

 

 

logoThe NEW Sanyo Eneloop Battery for the 21st Century

The key-advantage of the eneloop compared to usual rechargeable batteries is its extremely low self-discharge. Once charges, eneloop keeps its charge even if you store it for 6 or 12 months. ( 90 per cent of the charge after 6 months, 85 per cent after 12 months ) For a rechargeable battery this is a revolutionary advantage. No more worries about the state of charge of your battery. Just, charge them and keep them. Even after months you will still have an allmost full battery.In contrast to a disposable battery the eneloop can be charged 1000 times. This saves the environment and your purse. Thus one eneloop saves the waste of 999 disposable batteries. But also financially the eneloop has benefits. Even if you consider the slightly higher cost of the eneloop compared to a disposable battery and add the cost for the charger and the energy consumed by the charger, the investment for one eneloop returns easily after a few charging cycles. Imagine how much money you have spent for batteries in your life. Now there is an end to this spending. Please consider how long one eneloop will last, if you discharge and charge it once per week. Yes, your calculation was right: 19 years.
( Of course this is a mathematical calculation only and not a guarantee for the actual lifetime of the battery. )

eneloop is the right battery for all your applications.

It replaces disposable batteries in 

Remote controls, Cameras Clocks and alarm-clocks Electric torches, Radios, LCD-TVs Toothbrushes Shavers Flashlights Toys, MP3-Players Electronic games Computer-keyboards and mice.


These are available in AAA and AA sizes, 4per pack

AAA $24.00 /pack

AA $25.00 / Pack

eneloop

Rory's Aero Modelling Supplies is the Central Queensland supplier for RCV Engines Australia

rcv

The RCV - rotary cylinder valve four stroke engine represents a major advance in model engine design.
Although its moving components (piston, crank, cylinder and rotary valve) are totally conventional,
they are arranged in a radically novel configuration to provide the aero modeller with several key benefits,
whilst having similar handling characteristics to other 4-stroke model engines:-

rcv60
The RCV60-SP RCV90SP and RCV120SP were designed with the scale modeller in mind. This quality CNC machined engine has a similar power output to conventional poppet valve 4-stroke engines and can be used in scale or general sport models. Models that would normally use a 4-stroke .60 or a 2-stroke .40 can use the RCV60SP, models that would normally use a 4-stroke .90 or a 2-stroke .60 can use the RCV90SP and models that would normally use a 4-stroke .120 or a 2-stroke .70 can use the RCV120SP. The engine still uses RCV's unique rotary valve system - which has only one extra moving component to a 2-stroke and so is easy to maintain. One more benefit to RCV SP engines is the behind the prop starting facility (now included with engine), which allows the modeller to stay behind the prop at all times

RCV60-SP $Call

RCV90-SP $Call

RCV120-SP $Call

RCV58
The RCV58-CD and RCV91-CD have been designed to meet the demand from aero modellers who want a quality engine, that is easy to use and is competitively priced. Comparable in power to conventional 52 4-stroke engines (or .40 2-stroke engines), the RCV58-CD is the ideal choice for scale, aerobatic, fun and general flying. These engines are now starting to be used for training. The engine still uses RCV's unique rotary valve system - which has only one extra moving component to a 2-stroke and so is easy to maintain. Its ultra low profile, means the height of this engine is approximately 18mm less (compared to OS, Magnum) the highest point is 14 mm further back which makes cowling much easier than with other engines

RCV58-CD $Call

RCV91-CD $Call


Stay tuned, Site under construction -